NEPL (Nehali Enterprises Private Limited) provides world-class engineering services, maximizing business infrastructure through safety, performance, and optimization.
Routing is the process of selecting best paths in a network. In the past, the term routing was also used to mean forwarding network traffic among networks. However this latter function is much better described as simply forwarding. Routing is performed for many kinds of networks, including the telephone network (circuit switching), electronic data networks (such as the Internet), and transportation networks.
In packet switching networks, routing directs packet forwarding (the transit of logically addressed network packets from their source toward their ultimate destination) through intermediate nodes. Intermediate nodes are typically network hardware devices such as routers, bridges, gateways, firewalls, or switches.
In the context of mobile radio communication systems, RF Planning is the process of assigning frequencies, transmitter locations and parameters of a wireless communications system to provide sufficient coverage and capacity for the services required. The RF plan of a cellular communication system has two objectives: coverage and capacity.
The RF Planning process consists of four major stages:
A base transceiver station (BTS) is a piece of equipment that facilitates wireless communication between user equipment (UE) and a network. UEs are devices like mobile phones (handsets), WLL phones, computers with wireless Internet connectivity. The network can be that of any of the wireless communication technologies like GSM, CDMA, wireless local loop, Wi-Fi, WiMAX or other wide area network(WAN) technology.
Though the term BTS can be applicable to any of the wireless communication standards, it is generally associated with mobile communication technologies like GSM and CDMA. In this regard, a BTS forms part of the base station subsystem (BSS) developments for system management.
Microwave transmission refers to the technology of transmitting information or energy by the use of radio waves whose wavelengths are conveniently measured in small numbers of centimeter; these are called microwaves. This part of the radio spectrum ranges across frequencies of roughly 1.0 gigahertz (GHz) to 30 GHz.
To direct microwaves in narrow beams for point-to-point communication links or radiolocation (radar), a parabolic antenna is usually used. The relatively short wavelength of microwaves allows reasonably sized dishes to exhibit the desired highly directional response for both receiving and transmitting.
Electromotive force, also called emf (denoted mathcal{E} and measured in volts), is the voltage developed by any source of electrical energy such as a battery or dynamo. The word "force" in this case is not used to mean mechanical force, measured in newtons, but a potential, or energy per unit of charge, measured in volts.
In a two-terminal device (such as an electrochemical cell or electromagnetic generator), the emf can be measured as voltage across the two open-circuited terminals. The created electrical potential difference drives current flow if a circuit is attached to the source of emf.
In networks, management refers to the activities, methods, procedures, and tools that pertain to the operation, administration, maintenance, and provisioning of networked systems. Network management is essential to command and control practices and is generally carried out of a network operations center.
Drive Testing is a method of measuring and assessing the coverage, capacity and Quality of Service (QOS) of a mobile radio network. The technique consists of using a motor vehicle containing mobile radio network air interface measurement equipment that can detect and record a wide variety of the physical and virtual parameters of mobile cellular service in a given geographical area.
By measuring what a wireless network subscriber would experience in any specific area, wireless carriers can make directed changes to their networks that provide better coverage and service to their customers.
Maximize your business infrastructure in order to face increasingly stringent demands on productivity, safety, equipment availability, and performance optimization. Upgrading your automation systems to the latest control technology can reap great benefits.
Fluctuations in PLC programming demands can be solved by using NEHALI ENTERPRISES PRIVATE LIMITED (NEPL) flexible Programmable Logic Controller (PLC) programmer service. An experienced PLC programmer from NEPL can provide a company with immediate support for a day, a week, a month or longer.
NEPL’ PLC programmers offer more just PLC programming expertise. They are experienced in the design and implementation of SCADA, DCS and Safety Systems, and have extensive experience of working with a wide range of PLCs, from single unit devices to large distributed rack-based systems.
NEPL safely builds, maintains and provides comprehensive solutions and services for electricity, and all its conveniences, to neighborhoods and businesses. Utilities, electric cooperatives, municipal agencies and independent power producers choose NEPL because, as the leader for solutions and services, its extensive knowledge, expansive resources and complete scope of services are unmatched.
Since our inception, NEPL has focused on becoming a single-source solution for complex power infrastructure projects, including inside electrical. Maintenance, installation and repair of a full range of electrical components are some of the many core competencies.
NEPL specializes in a variety of power infrastructure services, from acceptance testing and field engineering to the maintenance, troubleshooting, repair and modifications of all elements in a power system. Services include consultation, routine inspections, system tests, cleaning contacts, and preventative measures.